Garrett GTX3582R GEN II Turbocharger

Garrett GTX3582R GEN II Turbocharger

Horsepower: 450 - 900 HP
Displacement: 2.0L - 4.5L

Key Features:

• GEN II aerodynamics for increased horsepower
• 66mm compressor
• Fully-machined speed sensor port
• Standard & reverse rotation options
• Dual ceramic ball bearings
• Water-cooled center housing

Warning: Max speed is 130,000 RPM. Exceeding this limit may cause failure. A speed sensor (sold separately) can be installed to monitor shaft speed.

Performance depends on vehicle modifications and tuning. Power ratings are based on compressor choke flow.

Technical Specifications:

Compressor:

• Inducer: 66mm
• Exducer: 82mm
• Trim: 64
• A/R: 0.70

Turbine:

• Inducer: 68mm
• Exducer: 62mm
• Trim: 84

Housing Options:

• T3 & T4 Turbine Housings (A/R: 0.63, 0.82, 1.06)
• V-Band Turbine Housings (A/R: 0.61, 0.83, 1.01)
• Reverse Rotation Models Available

Advanced Features:

• Redesigned Compressor Wheel: Improved aerodynamics for up to 20% more horsepower
• Fully Machined Housing: Precision-built inlet, outlet, and ported shroud
• High-Flow Compressor Housing: Optimized for airflow, non-interchangeable with GEN I compressor wheels
• Speed Sensor Port: Allows for real-time turbocharger monitoring (sensor sold separately)
• Cross-Compatible with GT & GTX Turbine Housings

Note: Garrett Performance Kits are for racing vehicles only and not street-legal. Use at your own risk. Ensure compliance with all regulations.

Downloads:

• Configuration Guide
• Compressor Map
• Exhaust Flow Chart
• Product Photos
• Flange Diagram
• Speed Sensor Installation