略過產品資訊
1 / 1

Radium Engineering

Radium Engineering Direct Mount Filler

Radium Engineering Direct Mount Filler

定價 $99.74 USD
定價 $104.99 USD 售價 $99.74 USD
特價 售罄
結帳時計算運費
Filler Configuration

Installation Instructions

These fuel fillers are designed to mount directly to Radium Engineering fuel cell surge tanks. There are fuel fillers on this page specific to both the FCST and the FCST-X.

FCST DIRECT MOUNT FUEL FILLERS

The direct mount fuel fillers listed below are specific to the following FCSTs ONLY: 20-014X-XX, 20-049X-XX, 20-069X-XX, and 20-099X-XX. NOTE: Direct mount fuel fillers for the newer FCST-X (20-199X-XX) can be found towards the bottom of this page. The fillers below can be used on any fuel cell that uses a 6-bolt 2.18" (55mm) bolt circle mounting flange. Screw threads are the industry standard 1/4"-28.

20-0197-V FCST 6-Bolt, Direct Mount Fill Neck and Cap

The 20-0197-V Direct Mount Fill Neck and Cap is perfect for filling directly into the fuel cell, as shown.



This kit uses the 20-0148-V Fill Neck Cap (included) so filling is quick and simple.

Included with 20-0197-V:

-Machined and Anodized Aluminum Fill Neck
-Anodized and Laser Etched Aluminum Cap
-FKM Gasket Flange Seal
-FKM O-ring Cap Seal
-Stainless Steel Hardware

20-0495-V FCST 6-Bolt, Dry Break, 1.5in, Female, Direct Mount, Vented

Designed for direct mounting onto a fuel cell. For mating, a 6-bolt flange with a 2.18" PCD bolt circle (as found on the FCST) is required. Includes 20-0549-V Dry Break, 1.5in, Female, Vented as well as an aluminum housing, stainless steel hardware, and a gasket. The components, materials, and seals are compatible with all fuel types (unleaded and leaded gasoline, diesel, AV gas, methanol, ethanol, E15, E85, etc.).

Specifications:
Height: 3.43" (Dry Break to Gasket)
Mate: 20-0496 Dry Break, 1.5in, Male

FCST-X DIRECT MOUNT FUEL FILLERS

The direct mount fuel filler below is specific to the FCST-X ONLY (20-1990-XX, 20-1991-00, 20-1992-XX, 20-1993-00, 20-1995-00). NOTE: Direct mount fuel fillers for the older FCST (20-014X-XX, 20-04XX-XX, 20-06XX-XX, and 20-09XX-XX) can be found at the top of this page. The fillers below can be used on any fuel cell that uses a 3-bolt 2.34" (59.5mm) bolt circle mounting flange. Screw threads are M5x0.8mm.

20-1197-V FCST-X 3-Bolt, Direct Mount Fill Neck and Cap

The 20-1197-V Direct Mount Fill Neck and Cap is perfect for filling directly into the fuel cell.

存貨單位 (SKU):RAD-20-0197-V

查看完整資訊