Horsepower: 750 - 1500
Displacement: 2.0L - 8.0L

Features

• G45-1500 compressor aero increases flow up to 18% (compared to GTX4508R 76mm)
• 76mm compressor inducer | 109mm compressor exducer
• Dual ceramic ball bearing with steel cages
• G Series turbine aero increases flow 14% (compared to GTX45R)
• Inconel turbine wheel with 89mm inducer flows up to 56 lbs/min
• Lightweight aluminum backplate
• Fully machined speed sensor and pressure ports
• Water fittings included with supercore
• Stainless steel turbine housings available in T4 divided inlet
• Sized for drag racing classes: Sport Front Wheel Drive, Ultimate Street, Super Street, Street Fighter

G45-1500 Part Number: 888169-5005S

WARNING: Maximum allowable turbocharger speed is 100krpm. The use of this product above max turbocharger speed is at the owner’s risk, and can result in damage and premature failure. To protect the turbocharger from overspeed when operating, a speed sensor can be installed into the compressor housing to monitor shaft speed. Sensors sold separately. (click here for details)

Performance results of this product are highly dependent upon your vehicle’s modifications and tuning/calibration. The horsepower numbers represented above are calculated based strictly on choke flow of the compressor map (total turbo capability), which represents the potential flywheel horsepower.

G-SERIES G45-1500 76MM

Reference Data 

G45-1500	Compressor				Turbine
	Inducer	Exducer	Trim	A/R	Inducer	Exducer	Trim
HP: 750-1500 Disp: 2.0L-8.0L	76mm	109mm	49	0.85	89mm	82mm	84
Supercore	PN
Standard Rotation	888169-5005S
Turbine Kits: G45	PN		A/R	Inlet	Outlet	Wastegate	Divided
Interchangeable with G45-1125 | G45-1350 | G45-1500 Supercores	757707-0019		1.01	V-Band	V-Band	Free Float	N
	757707-0020		1.15	V-Band	V-Band	Free Float	N
	757707-0021		1.28	V-Band	V-Band	Free Float	N
	757707-0022		1.44	V-Band	V-Band	Free Float	N
	757707-0023		1.01	T4	V-Band	Free Float	Y
	757707-0024		1.15	T4	V-Band	Free Float	Y
	757707-0025		1.28	T4	V-Band	Free Float	Y
	757707-0026		1.44	T4	V-Band	Free Float	Y

G-SERIES G45-1500 76MM

Download Section

File Name	Link	View
Configuration Guide	Download	View

File Name	Link	View
Compressor Map	Download	View
Exhaust Flow Chart	Download	View
Product Photo	Download	View
Flange Diagram	Download	View
Speed Sensor Kit Installation Instruction	Download	View

G-SERIES G45-1500 76MM

Compressor Map & Exhaust Flow Chart

COMPRESSOR MAP

EXHAUST FLOW CHART

Additional G45 Configurations

G Series G45 is available in 2 additional compressor inducer sizes. G45-1125 (67mm) and G45-1350 (72mm) You can click the hyperlinks to go directly to those product pages. All G45 models are interchangeable meaning they are the same size and can be swapped out without having to reconfigure any other turbo kit parts.

 

G45 Turbine Housing Kits

G45 turbine housing kits are available in four A/R. 1.01 A/R | 1.15 A/R | 1.28 A/R | 1.44 A/R stainless steel housings with T4 divided inlet flange. Our 1.44 A/R T4 turbine housing flows 57 LBS/MIN of air which is a 14% increase over the GTX45 turbine wheel.