Injector Dynamics
Injector Dynamics, BMW B58
Injector Dynamics, BMW B58
Не удалось загрузить сведения о доступности самовывоза
ID1050
Like the ID1300x and ID1700x, the ID1050x is not a modified production component. It is a built to spec motorsport injector, offering optimization of critical operating parameters important to you, the motorsport tuner. Compared to the original ID1000, the ID1050x offers:
- Corrosion resistant internals make it compatible with all known fuels
- Capable of extended service life with corrosive fuels.
- Compact body allows fitment in 200+ applications, including current and future engines utilizing short body injectors.
- Improved internal flow path increases output by 5% without sacrificing low flow performance.
- Stronger magnetic circuit offers stable operation up to 10 bar.
- Replaceable inlet filter to extend service life.
ID1300
The ID1300x² is an all new injector, designed in partnership with Bosch Motorsport. This high flow injector was designed with alternative fuels in mind, and was originally the only performance injector available with all stainless internals. It is compatible with all known fuels, and will stand up to the corrosive nature of alcohol better than any injector on the market.
While the ID1300x² was designed with an eye towards ethanol fueled engines, it has a minimum fuel mass compatible with gasoline use, and will provide exceptional idle and cruise behavior under these conditions.
ID1750
The ID1750 is the successor to the ID1700, featuring numerous improvements. Compared to the 1700, the 1750 offers:
- Higher Dynamic Flow Rate With no Increase in Minimum Fuel Mass.
- Better Cylinder to Cylinder Balance at Low Pulsewidths.
- Improved Pressure Sensitivity.
- Nominal Flow Rate – 1728cc/min @ 3.0 Bar (43.5 psi), Using E10 Emissions Certification Fuel at 49 Degrees C (120F)
- Maximum Differential Fuel Pressure – 7.0 Bar (101.5 psi)
- Fuel Compatibility – Compatible with Methanol/Ethanol/MTBE/Nitromethane/All Known Hydrocarbon Fuels.
- Electrical Connector – USCAR
Not compatible with OEM Fuel System; must use Port Injection Kit.
BMW B58 Gen 1 Applications:
1 Series
2016-2019 F20/F21 M140i
2 Series
2016-2019 F22/F23 M240i
3 Series
2015-2019 F30/F31 340i / 340i xDrive
2016-2019 F34 340i GT / 340i GT xDrive
4 Series
2016-2020 F32/F33/F36 440i / 440i xDrive
5 Series
2016-2019 G30/G31 540i / 540i xDrive
6 Series
2017-2019 G32 640i GT / 640i GT xDrive
7 Series
2015-2019 G11/G12 740i / 740i xDrive
X3 Series
2017-2019 G01 X3 M40i
X4 Series
2018-2019 G02 X4 M40i
BMW B58 Gen 2 Applications:
3 Series
2019-Present G20/G21 M340i / M340i xDrive
4 Series
2020-Present G22/G23/G26 M440i / M440i xDrive
Z Series
2019-Present G29 Z4 M40i
5 Series
2020-Present G30/G31 LCI 540i / 540i xDrive
6 Series
2020-Present G32 LCI 640i GT / GT 640i xDrive
7 Series
2019-Present G11/G12 LCI 740i / 740i xDrive
X3 Series
2020-Present G01 X3 M40i
X4 Series
2020-Present G02 X4 M40i
X5 Series
2018-Present G05 X5 xDrive40i
X6 Series
2019-Present G06 X6 xDrive40i
X7 Series
2018-Present G07 X7 xDrive40i
ALPINA B58 Gen 2 Applications:
B3 Series
2020-Present G20/G21 B3
B4 Series
2022-Present G22 B4
B5 Series
2020-Present G30 B5
XB7 Series
2020-Present G07 XB7
Toyota B58 Gen 2 Applications:
A90 / A91 Supra
2020-Present GR Supra 3.0
2020-Present GR Supra 3.0 Premium
2021-Present GR Supra 3.0 A91 Edition
Share
Артикул:ID-HPFI-1050
Просмотреть всю информацию
